Duratrax Manuals (Others)

This manual contains assembly and operation instructions for the DuraTrax® Evader BX, including important warnings and precautions to be followed during assembly and use.

File format: PDF Size:2280 KB

This document provides warranty information and technical support information for DuraTrax® products. The product features a weight of 1lb 14oz, a length of 17.25 inches, a width of 8 inches, a height of 4.5 inches, a wheelbase of 10.5 inches, and is equipped with a 20 Turn Photon Speed motor and a 2-channel surface frequency radio.

File format: PDF Size:371 KB

This document introduces the information of DURATRAX DXR8-E, including the features, operation instructions and safety precautions.

File format: PDF Size:11088 KB

This document introduces the operating instructions and precautions for DXR500 radio controlled motorcycle.

File format: PDF Size:5992 KB

This document provides detailed information about 1/5 scale brushless EP motorcycle, including product features, usage methods and safety matters.

File format: PDF Size:2521 KB

This document is the assembly and operation manual for the DuraTrax Cliff Climber, introducing the features and characteristics of Cliff Climber, including the necessary accessories, safety precautions, etc.

File format: PDF Size:4884 KB

This document is the assembly and operation manual of DuraTrax™ Axis Buggy, which introduces the assembly and operation methods, as well as warranty policy.

File format: PDF Size:669 KB

This is a very compact, lightweight 12V DC power supply that uses a 22kHz high frequency switching operation, outputs 7 amps continuous current, measures only 3.9 inches x 2.75 inches x 2.5 inches, and weighs only 7.2 ounces.

File format: PDF Size:92 KB

The Piranha Digital Peak Charger is a charger that can charge 1-8 nicad or NiMH batteries. It can be powered by AC or DC power supply, the charging current range is 0.1-5.0A, it supports automatic charging mode, and it supports custom peak detection sensitivity or “threshold” and three kinds of trickle charge current.

File format: PDF Size:214 KB

This is a nickel-cadmium nickel-metal hydride battery charger that can charge 6 or 7 sub-C battery packs at a maximum of 4 amps from a 12 volt DC power source.

File format: PDF Size:95 KB

The Onyx 245 charger is two chargers in one! Identical twin outputs make the 245 an excellent choice for models that use two battery packs or modelers who rotate through multiple batteries at home or at the track. A built-in balancer for each port optimizes charging of lithium packs, including LiPo and LiFe cells such as LiFeSource™ brand packs. It’s also compatible with NiCd and NiMH batteries. AC/DC fl exibility, plus the advanced LCD with backlight, simple menus and controls make it super-easy for anyone to use anytime, anywhere. Its tremendous fl exibility, small size and weight, yet high power give racers another advantage on race day! It is strongly recommended to read this manual completely before use! Damage resulting from misuse or modifi cation will void your warranty. WARNING!! Charging lithium-based rechargeable batteries poses a risk of FIRE! NEVER treat lithium-based batteries in the same manner as other battery types. NEVER leave lithium batteries unattended while being charged! ALWAYS charge lithium-based batteries in a fi reproof location! Failure to follow all care and handling instructions contained in this manual could result in quick, severe, permanent damage to the batteries and all surroundings!! Follow all safety precautions when using such batteries, as listed on page 3 of this manual! INDEX Specifi cations and Features . . . . . . . . . . . . . . . . . . . . . . 2 Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Gloss

File format: PDF Size:196 KB

This manual provides specifications and features of a charger, including AC and DC input voltage, protective devices, case size, and weight. It also describes the battery types, capacity range, fast charge current, and termination for each output. The manual provides instructions for controls and connections of the charger, as well as important precautions for use and handling.

File format: PDF Size:482 KB

The Onyx 235 charger is great for a huge range of charging and balancing needs for electric on-road, off-road, boat and radio applications! Charge currents up to 8 amps and output voltages for charging up to 10-cell NiMH or 4S LiPo packs make it equally as useful for 1/32 scale micros as large as 1/8 scale electrics, plus nitro receiver packs and transmitter batteries. A built-in balancer optimizes charging of lithium packs, including LiFe cells such as LiFeSource™ brand packs. A built-in jack is perfect for charging radio batteries. A USB jack allows for charging of music players, cell phones, etc. while at the track. AC/DC fl exibility with detachable input cords, reversed backlit LCD, simple controls and menus make it super- easy to use anytime, indoors or out. It is strongly recommended to completely read this manual before use! Damage resulting from misuse or modifi cation will void your warranty. WARNING!! Charging lithium-based rechargeable batteries poses a risk of FIRE! NEVER treat lithium-based batteries in the same manner as other battery types. NEVER leave lithium batteries unattended while being charged! ALWAYS charge lithium-based batteries in a fi reproof location! Failure to follow all care and handling instructions contained in this manual could result in quick, severe, permanent damage to the batteries and all surroundings!! Follow all safety precautions when using such batteries, as listed on page 3 of this manual!

File format: PDF Size:199 KB

This document is the manual of a lithium battery charger. It introduces the charging method, safety precautions and other contents of the charger.

File format: PDF Size:811 KB

This manual provides specifications and features of a battery charger. It supports 110V AC and 11 to 15V DC input, suitable for 4 to 8 NiCd or NiMH batteries with a capacity range of 50 to 9900mAh. It has adjustable fast charge current and trickle charge current. It also includes reverse polarity and current overload protection.

File format: PDF Size:932 KB

This document describes the specifications and features of a charger, including input and output power, supported battery types and capacity range, fast charge current and termination, protective devices, etc.

File format: PDF Size:488 KB

DuraTrax Onyx 200 charger

File format: PDF Size:401 KB

The document describes a product with the following features: compatible with various types of batteries, adjustable charging speed, peak detection and safety timer function, automatic startup and status display.

File format: PDF Size:306 KB

The document introduces an advanced fuzzy logic peak detector with automatic cut-off circuit and high efficiency P-Channel MOSFET drive transistors. It can pulse current to peak charge NiCd and NiMH batteries to 100% without overheating. It features built-in Artificial Intelligence to eliminate false peaks and supports both AC or DC input. Peak Charger 1 offers two fixed charge rates, a minimum 3.5A peak charge current for 6 cell (7.2V) or 7 cell (8.4V) sub-C size battery packs, and a 1A peak charge for 8 cell (9.6V) transmitter batteries. Peak Charger 2 offers a minimum 3.5A peak charge current for 6 cell (7.2V) or 7 cell (8.4V) sub-C size battery packs. It provides 100mA trickle charge rates for 6 and 7 cell packs, and 50mA trickle for 8 cell Tx packs. The charger is equipped with two multi-function, high intensity LEDs for easy set-up and has fused overload, thermal, and reverse polarity protection. It is designed for charging only nickel-cadmium or nickel-metal hydride rechargeable batteries, and may cause damage to other types of batteries. Automotive type battery chargers should not be used to power the charger. The charger should be kept away from water, moisture or foreign objects, and the air intake holes on the charger should not be covered to prevent overheating. It is not recommended to charge batteries containing fewer than 6 cells. The charger should not be left unattended while charging, and if it becomes hot, the battery should be disconnected and input power should be removed from the charger immediately. The charger or battery should be allowed to cool down before reconnecting.

File format: PDF Size:190 KB

This document is the IntelliPeak Ice charger's manual

File format: PDF Size:1040 KB