MICROCHIP Manuals (Others)

This data sheet provides detailed information about the PIC18F6310/6410/8310/8410 devices, including features, pin configuration, packaging, device dimensions, and performance specifications.

File format: PDF Size:7512 KB

This data sheet provides data for the 28/40/44-pin flash-based, 8-bit CMOS microcontrollers with nanoWatt technology PIC16F91X, including features and characteristics.

File format: PDF Size:4959 KB

This is the PIC18F6520/8520/6620/8620/6720/8720 data sheet from Microchip.

File format: PDF Size:6681 KB

This manual describes the use of the Microchip PICDEM 2 Plus.

File format: PDF Size:756 KB

The HCS512 is a code hopping decoder designed for secure Remote Keyless Entry (RKE) systems.

File format: PDF Size:330 KB

The MCP1702 is a family of CMOS low dropout (LDO) voltage regulators that can deliver up to 250 mA of current while consuming only 2.0 µA of quiescent current (typical). It is suitable for battery-powered devices, smoke detectors, digital cameras, etc.

File format: PDF Size:779 KB

TCM809/TCM810 is a low-power power supply monitoring chip launched by Microchip. It is suitable for 2.5V, 3.0V, 3.3V, 5.0V power supplies.

File format: PDF Size:206 KB

This document introduces TC4420/TC4429 6A (peak) single-output MOSFET drivers. These drivers are fabricated in CMOS for lower power and more efficient operation versus bipolar drivers. Both devices have TTL/CMOS compatible inputs that can be driven as high as VDD + 0.3V or as low as –5V without upset or damage to the device. This eliminates the need for external level-shifting circuitry and its associated cost and size. The output swing is rail-to-rail, ensuring better drive voltage margin, especially during power-up/power-down sequencing. Propagational delay time is only 55 ns (typ.) and the output impedance is 2.5 Ω.

File format: PDF Size:268 KB

This document introduces the features of the MCP14E3/MCP14E4/MCP14E5 series devices, including high peak output current, independent enable function, low switch current, wide input supply voltage range, high capacitive load drive capability, short delay time, latch-up protection and so on. These devices are used in switch mode power supplies, pulse transformer drives, line drivers, motor and solenoid drives.

File format: PDF Size:573 KB

The MCP3004/3008 devices are successive approximation 10-bit Analog-to-Digital (A/D) converters with on-board sample and hold circuitry. The MCP3004 is programmable to provide two pseudo-differential input pairs or four single-ended inputs. The MCP3008 is programmable to provide four pseudo-differential input pairs or eight single-ended inputs. Differential Nonlinearity (DNL) and Integral Nonlinearity (INL) are specified at ±1 LSB. Communication with the devices is accomplished using a simple serial interface compatible with the SPI protocol. The devices are capable of conversion rates of up to 200 ksps. The MCP3004/3008 devices operate over a broad voltage range (2.7V - 5.5V). Low current design permits

File format: PDF Size:753 KB

This document is a preliminary datasheet for the PIC12F508/509/16F505 series 8/14-pin, 8-bit Flash microcontrollers, released by Microchip Technology Inc. in 2007. The datasheet describes the features and characteristics of these products.

File format: PDF Size:1659 KB

This document is a data sheet for EPROM-Based 8-Bit CMOS Microcontrollers by Microchip Technology Inc. The document provides information about device applications and features, and emphasizes the responsibility to ensure that the application meets specifications. Additionally, the document highlights that Microchip Technology Incorporated does not provide any representation or warranty regarding the accuracy or use of the information, or infringement of patents or other intellectual property rights arising from such use or otherwise.

File format: PDF Size:3678 KB

Introduced the features and characteristics of Microchip PIC16C6X 8-bit CMOS microcontrollers, including high-performance RISC CPU, 35 single-word instructions, 20MHz clock input, eight-level deep hardware stack, etc.

File format: PDF Size:2711 KB

This is an abstract of the DS41190A PIC12F629/675 data sheet published by Microchip.

File format: PDF Size:3430 KB

The datasheet provides detailed information on the features and characteristics of the TC1017, such as space-saving 5-pin SC-70 and SOT-23 packages, extremely low operating current, very low dropout voltage, 150 mA rated output current, only 1µF ceramic output capacitance, high output voltage accuracy, 10µs (typical) wake-up time from SHDN, power-saving shutdown mode, overcurrent and overtemperature protection, pin-compatible upgrade for bipolar regulators

File format: PDF Size:373 KB

The MCP1700 is a family of CMOS low dropout (LDO) voltage regulators that can deliver up to 250 mA of current while consuming only 1.6 µA of quiescent current (typical). The input operating range is specified from 2.3V to 6.0V, making it an ideal choice for two and three primary cell battery-powered applications, as well as single cell battery-powered applications.

File format: PDF Size:522 KB

28/40/44-pin Enhanced Flash Microcontrollers with ECAN™ Technology, 10-Bit A/D and nanoWatt Technology

File format: PDF Size:8179 KB

This manual describes the use of the MCP1650/1/2/3 evaluation board. The evaluation board includes power, MCP1650/1/2/3 controller and peripheral devices, which can be used to evaluate the MCP1650/1/2/3 controller's function.

File format: PDF Size:344 KB

This is a user guide for the PICkit Serial I2C Demo Board DS51657A.

File format: PDF Size:749 KB

This document is the User's Guide for the Microchip Technology Inc. DS51579C MCP3551 22-Bit Delta-Sigma ADC PICtail™ Demo Board. It provides instructions and information about the features of the MCP3551 22-Bit Delta-Sigma ADC PICtail™ demo board.

File format: PDF Size:807 KB