MICROCHIP Manuals (Others)

DS41262A PIC16F685/687/689/690 Data Sheet 20-Pin Flash-Based, 8-Bit CMOS Microcontrollers

File format: PDF Size:4356 KB

This document is a data sheet for the PIC16F87X series microcontrollers from Microchip Technology Inc. The series includes 28/40-pin 8-bit CMOS FLASH microcontrollers with high performance and low power consumption.

File format: PDF Size:3825 KB

This datasheet provides details on the 28/40/44-pin PIC18F2X1X/4X1X microcontrollers with 10-bit A/D and nanoWatt technology.

File format: PDF Size:7025 KB

The 25AA160A/B, 25LC160A/B (25XX160A/B*) are 16 Kbit Serial Electrically Erasable PROMs. The memory is accessed via a simple Serial Peripheral Interface™ (SPI™) compatible serial bus. Access to the device is controlled through a Chip Select (CS) input.

File format: PDF Size:522 KB

Microchip Technology Inc. 24C01A/02A/04A is a 1K/2K/4K bit Electrically Erasable PROM. The device features low power CMOS technology, hardware write protect, and a two wire serial interface bus compatible with I2C. It operates at 5.0V only and has a self-timed write cycle with auto-erase. The device has a page-write buffer, 1ms write cycle time for single byte, and guarantees 1,000,000 Erase/Write cycles. It has a data retention of over 200 years and is available in 8-pin DIP/SOIC packages. The device is suitable for extended temperature ranges.

File format: PDF Size:78 KB

This document describes the features and characteristics of Microchip Technology Inc. 24AA256/24LC256 (24xx256*). It is a 32K x 8 (256K bit) Serial Electrically Erasable PROM, capable of operation across a broad voltage range (1.8V to 5.5V). It has been developed for advanced, low power applications such as personal communications or data acquisition. This device also has a page-write capability of up to 64 bytes of data. This device is capable of both random and sequential reads up to the 256K boundary. Functional address lines allow up to eight devices on the same bus, for up to 2 Mbit address space. This device is available in the standard 8-pin plastic DIP, and 8-pin SOIC (208 mil) packages.

File format: PDF Size:182 KB

This datasheet introduces the core features, peripheral features and characteristics of the DS30292B microcontroller produced by Microchip Technology Inc.

File format: PDF Size:3545 KB

File format: PDF Size:0 KB

This document describes the features and characteristics of the PIC16C55X(A) series products, including high-performance RISC CPU, peripheral features, and special microcontroller features.

File format: PDF Size:1011 KB

The MPLAB PM3 Universal Device Programmer is easy to use and operates with a PC or as a stand-alone unit, and programs Microchip's entire line of PICmicro® devices as well as the latest dsPIC30F DSC devices. The MPLAB PM3 features a large and bright LCD unit (128x64 pixels) to display easy menus, programming statistics and status information. The MPLAB PM3 programmer has exceptional programming speed to allow high production throughput, especially important for large memory devices, and includes a Secure Digital/Multimedia Card slot for easy and secure data storage and transfer. The MPLAB PM3 programmer is designed with 40 programmable socket pins, allowing each socket module to be configured to support many different devices, requiring fewer socket modules to support the entire line of Microchip parts. The socket modules use multi-pin connectors for high reliability and quick interchange. An adapter allows current PROMATE®II socket modules to be used on the MPLAB PM3 programmer. When connected to a PC-host system either via a serial or USB port, the MPLAB PM3 programmer is seamlessly integrated with the MPLAB Integrated Development Environment (IDE) providing an exceptionally user-friendly interface for the ultimate control during programming. The MPLAB IDE includes a full-featured macro assembler, powerful software simulator with symbolic debugger, color-coded programmer's editor, project manager, high-level language and macro support, and other features.

File format: PDF Size:3312 KB

This document is an introduction to Microchip Technology's low power solutions demonstration board. The document contains information regarding device applications, which is provided for convenience and may be superseded by updates. Microchip disclaims all liability arising from this information and its use. The document also mentions some registered trademarks of Microchip.

File format: PDF Size:1133 KB

File format: PDF Size:0 KB

This document is the data sheet of DS39762D PIC18F97J60 series produced by Microchip Technology Inc.

File format: PDF Size:8196 KB

This is the preliminary version of PIC18F2423/2523/4423/4523 data sheet published by Microchip Technology Inc. in 2006.

File format: PDF Size:6756 KB

This document is about Microchip's PIC16C5X series product data sheet

File format: PDF Size:2647 KB

The TC1320 is an 8-bit digital-to-analog converter (DAC) from Microchip Technology Inc. It features ±2 LSB INL, ±0.8 LSB DNL, 2.7-5.5V single supply operation, simple SMBus/I2CTM serial interface, low power consumption, and it can be widely used in programmable voltage sources, digital controlled amplifiers/attenuators, process monitoring and control, etc.

File format: PDF Size:443 KB

This datasheet introduces the features and characteristics of the PIC16C505 microcontroller

File format: PDF Size:1200 KB

This document introduces the features and characteristics of Microchip Technology Inc. MCP3302/04 13-bit A/D converters, including full differential inputs, single/differential inputs, ±1 LSB maximum DNL, ±1 LSB maximum INL, single supply operation, 100 ksps sampling rate, 50 nA typical standby current, 450 µA maximum operating current, industrial temperature range, etc.

File format: PDF Size:811 KB

The TC1108 is a low dropout linear regulator from Microchip Technology Inc. Its features include extremely low supply current (50µA), very low dropout voltage, 300mA output current, high output voltage accuracy, standard or custom output voltages, over current and over temperature protection. It can be used in battery operated systems, portable computers, medical instruments, instrumentation, cellular/GSM/PHS phones, linear post-regulators for SMPS, and pagers.

File format: PDF Size:431 KB

This data sheet describes the features of the PIC16F83 series of microcontrollers, including the instruction set, operating speed, memory, peripheral devices, etc.

File format: PDF Size:2019 KB