ANALOG Manuals (Others)

AD7873 is a 12-bit successive approximation ADC with a synchronous serial interface and low on resistance switches for driving touch screens. AD7873 operates from a single 2.2 V to 5.25 V power supply and features throughput rates greater than 125 kSPS.

File format: PDF Size:568 KB

This document describes the features and characteristics of the 16-bit, 250 kSPS PulSAR ADC AD7685 Rev. B. It has 16-bit resolution with no missing codes and a throughput of 250 kSPS. The INL is typically ±0.6 LSB and maximum ±2 LSB (±0.003% of FSR). The SINAD is 93.5 dB @ 20 kHz and THD is -110 dB @ 20 kHz. The ADC has a pseudo differential analog input range of 0 V to VREF with VREF up to VDD. It operates on a single supply of 2.3 V to 5.5 V with a 1.8 V to 5 V logic interface. The ADC supports serial interfaces such as SPI®-/QSPI™-/MICROWIRE™-/DSP and can be daisy-chained. It has low power dissipation and standby current of 1 nA. The product is available in a 10-lead MSOP (MSOP-8 size) and 3 mm × 3 mm QFN (LFCSP) (SOT-23 size) package.

File format: PDF Size:611 KB

This document is the datasheet of AD7940, which introduces the features and characteristics of AD7940, including speed, power consumption, voltage range, bandwidth, interface, applications, etc.

File format: PDF Size:381 KB

The AD9480 is an 8-bit, 250 MSPS 3.3 V A/D converter optimized for high speed and low power consumption. Small in size and easy to use, it is ideal for applications such as digital oscilloscopes, instrumentation and measurement, communications, point-to-point radios, and predistortion loops.

File format: PDF Size:692 KB

The AD7787 is a low power, complete analog front end for low frequency measurement applications. It contains a low noise, high resolution, Σ-Δ ADC with a dither modulator, low pass filter, and output buffer. The AD7787 can be interfaced to a microcontroller or DSP through analog interfaces, and can communicate with a PC through digital interfaces.

File format: PDF Size:317 KB

AD7912/AD7922 are 10-bit and 12-bit, high speed, low power, 2-channel successive approximation ADCs, designed specifically for battery-powered applications, such as mobile devices, data acquisition systems, personal digital assistants, medical instruments, mobile communications, instrumentation and control systems.

File format: PDF Size:363 KB

AD7911/AD7921 are 10-bit and 12-bit high speed, low power, 2-channel successive approximation ADCs, respectively.

File format: PDF Size:292 KB

The AD7666 is a 16-bit 500 kSPS PulSAR® unipolar ADC with an internal 2.5 V reference, typical drift of 3 ppm/°C and guaranteed maximum drift of 15 ppm/°C.

File format: PDF Size:631 KB

This document describes the AD7667, a 16-bit 1 MSPS PulSAR® unipolar ADC with features such as a 2.5V internal reference and 1 MSPS throughput.

File format: PDF Size:671 KB

The document describes the features and characteristics of the AD9878 mixed-signal front end for broadband applications.

File format: PDF Size:570 KB

AD7655 is a low-cost, 4-channel, 16-bit 1 MSPS PulSAR® ADC from Analog Devices.

File format: PDF Size:537 KB

The AD7732 is a high precision, high throughput analog front end. True 16-bit p-p resolution is achievable with a total conversion time of 500 µs (2 kHz channel switching), making it ideally suitable for high resolution multiplexing applications.

File format: PDF Size:449 KB

The AD7734 is a high precision, high throughput analog front end from TI. It features 24 bits no missing codes, ±0.0025% nonlinearity, 18-bit p-p resolution (21 bits effective) at 500 Hz, 16-bit p-p resolution (19 bits effective) at 2 kHz, and 14-bit p-p resolution (18 bits effective) at 15 kHz. The device also integrates on-chip per channel system calibration, supports 4 single-ended analog inputs, and has ±10 V input ranges. It can be configured via a 3-wire serial interface SPI™, QSPI™, MICROWIRE™, and DSP compatible Schmitt trigger on logic inputs. The AD7734 operates with a single +5 V analog supply and 3 V or 5 V digital supply. It comes in a 28-lead TSSOP package. AD7734 is suitable for PLCs/DCS, multiplexing applications, process control, and industrial instrumentation.

File format: PDF Size:1290 KB

AD7910/AD7920 is a 6-lead SC70 packaged 10-/12-bit ADC with a throughput rate of 250 kSPS. It is suitable for applications such as battery-powered systems, personal digital assistants, medical instruments, mobile communications, instrumentation and control systems, data acquisition systems, high-speed modems, optical sensors, etc.

File format: PDF Size:484 KB

The AD7908/AD7918/AD7928 are 8-channel, 1 MSPS, 8-/10-/12-bit ADCs with a sequencer. They feature fast throughput rate, low power consumption, flexible power/serial clock speed management, and a high-speed serial interface. These ADCs operate from a power supply of 2.7V to 5.25V and have a wide input bandwidth.

File format: PDF Size:566 KB

The AD7656/AD7657/AD7658 is a 250 kSPS, 6-channel, simultaneous sampling, bipolar 16-/14-/12-bit ADC from Analog Devices.

File format: PDF Size:753 KB

This document introduces the 18-bit, 1.5 LSB INL, 400 kSPS PulSAR® differential ADC in MSOP/QFN package of AD7690.

File format: PDF Size:701 KB

The AD9219 is a quad, 10-bit, 40/65 MSPS serial LVDS 1.8 V A/D converter from Analog Devices. It offers excellent linearity, low power consumption, and low distortion, and is widely used in medical imaging, nondestructive ultrasound, portable ultrasound, and digital beamforming systems.

File format: PDF Size:1852 KB

This product is a quad, 12-bit, 40/65 MSPS serial LVDS 1.8 V A/D converter with good linearity, low power consumption and high integration.

File format: PDF Size:2008 KB

AD9233 is a monolithic 12-bit, 80 MSPS/105 MSPS/125 MSPS, 1.8 V analog-to-digital converter.

File format: PDF Size:1234 KB