Philips Manuals (Industrial)

BUK436W-800A/B is a power MOS transistor intended for use in applications such as switched mode power supplies, motor control, welding, DC/DC and AC/DC converters. It features a drain-source voltage of 800V, drain current of 4A, total power dissipation of 125W, and drain-source on-state resistance of 3-4Ω.

File format: PDF Size:72 KB

BUK436W-800A/B is an N-channel enhancement mode power MOS transistor intended for use in switched mode power supplies, motor control, welding, DC/DC and AC/DC converters, and general purpose switching applications. It features a drain-source voltage of 800V, drain current of 4A, total power dissipation of 125W, and drain-source on-state resistance of 3-4Ω.

File format: PDF Size:72 KB

BUK224-50Y is a monolithic single channel high side protected power switch, assembled in IL, with a nominal load current of 12A and a maximum continuous load current of 25A. It features low on-state resistance, CMOS logic compatibility, overtemperature protection, load current limiting, latched overload and short circuit protection, overvoltage and undervoltage shutdown with hysteresis, on-state open circuit load detection, diagnostic status indication, voltage clamping for turn off of inductive loads, and ESD protection on all pins. It is suitable for general controllers for driving lamps, motors, solenoids, and heaters.

File format: PDF Size:45 KB

BUK223-50Y is a power MOS switch produced by Philips Semiconductors. It features low on-state resistance, CMOS logic compatibility, and very low quiescent current.

File format: PDF Size:48 KB

BUK221-50DY is a monolithic temperature and overload protected dual high-side power switch based on TOPFET™ Trench technology.

File format: PDF Size:82 KB

BUK220-50Y is a TOPFET high side switch produced by Philips Semiconductors. It is a monolithic single channel high side protected power switch in TOPFET2 technology assembled in a 5 pin plastic surface mount package.

File format: PDF Size:34 KB

This is a product specification for TOPFET dual high side switch BUK218-50DC from Philips Semiconductors. It is a monolithic dual channel high side protected power switch assembled in IL Nominal load current (ISO) 8A. The switch is designed for driving lamps, motors, solenoids, and heaters, and features low on-state resistance, CMOS logic compatibility, very low quiescent current, overtemperature protection, load current limiting, overload and short circuit protection, self resetting overcurrent protection, overvoltage and undervoltage shutdown with hysteresis, off-state open circuit load detection, diagnostic status indication, voltage clamping for turn off of inductive loads, ESD protection on all pins, and reverse battery, overvoltage and transient protection.

File format: PDF Size:42 KB

BUK218-50DY is a dual channel high side switch from Philips Semiconductors. It has an 8A nominal load current, 16A maximum load current, and 50V maximum off-state supply voltage. Its operating temperature range is -40°C~150°C.

File format: PDF Size:44 KB

BUK219-50Y is a single channel high side protected power switch manufactured by Philips Semiconductors using TOPFET2 technology, packaged in a 5-pin plastic package.

File format: PDF Size:40 KB

The BUK217-50YT is a high side switch from Philips Semiconductors. It is manufactured using TOPFET2 technology and packaged in a SOT426 package. This switch features low on-state resistance, CMOS logic compatibility, very low quiescent current and latched overtemperature protection.

File format: PDF Size:37 KB

File format: PDF Size:0 KB

BUK215-50YT is a single channel high side protected power switch from Philips Semiconductors, assembled in a 5 pin plastic surface mount package.

File format: PDF Size:187 KB

BUK215-50Y is a high side switch manufactured by Philips Semiconductors. It adopts TOPFET2 technology. It is a single-channel device with overtemperature protection, load current limiting, overload and short circuit protection, overvoltage and undervoltage shutdown, open circuit load detection, diagnostic status indication, and voltage clamping.

File format: PDF Size:189 KB

BUK214-50Y is a monolithic single channel high side protected power switch in TOPFET2 technology. It is assembled in a 5 pin plastic surface mount package and has a nominal load current of 6A. It is suitable for driving lamps, motors, solenoids, and heaters.

File format: PDF Size:42 KB

BUK212-50Y and BUK217-50Y are single channel high-side power switches based on TOPFET™ Trench technology, with temperature and overload protection. They are suitable for applications such as 12V and 24V grounded loads, high inrush current loads, inductive loads, etc., and can replace relays and fuses.

File format: PDF Size:90 KB

BUK210-50Y is a TOPFET high side switch launched by Philips Semiconductors. It is a single channel high side protected power switch using TOPFET2 technology and packaged in a 5-pin plastic package.

File format: PDF Size:190 KB

BUK208-50Y and BUK213-50Y are single channel high-side TOPFET™ products produced by Philips Semiconductors. They have very low quiescent current, CMOS logic capability, Power TrenchMOS™, negative load clamping, overtemperature protection, overload protection, over and undervoltage protection, ESD protection for all pins, reverse battery protection, diagnostic status indication, low charge pump noise, operating voltage down to 5.5 V, loss of ground protection, and current limitation. They are suitable for 12 and 24V grounded loads, high inrush current loads, inductive loads, and relays and fuses replacements.

File format: PDF Size:90 KB

BUK207-50Y is a monolithic temperature and overload protected power switch based on MOSFET technology in a 5 pin plastic surface mount envelope, configured as a single high side switch.

File format: PDF Size:128 KB

BUK207-50X is a high side switch device launched by Philips Semiconductors, with 5V logic compatible input, over temperature protection, overload protection, high voltage load protection, low static current and other features.

File format: PDF Size:127 KB

The BUK206-50Y is a high side switch manufactured by Philips Semiconductors. It features a 5-pin plastic surface mount package and has temperature and overload protection. The maximum input voltage is 50V and the maximum continuous output current is 20A. The operating temperature range is -55℃~150℃.

File format: PDF Size:129 KB