Industrial Manuals

The STEVAL-IPE012V2 is a single-phase electricity meter based on the STPM10 metering IC and STM8L152 microcontroller. It has a current range of 10A / 80A, with accuracy of class 1 and dynamic range of 200:1. The nominal voltage is 240V and the nominal current is 10A (ITYP), with a maximum current of 80A (IMAX). The operating range is 0.6 Vb to 1.2 Vb. The meter constant is 3200 impulses/kWh. The power frequency range is 45 Hz to 65 Hz. The sensor consists of a primary side CT and secondary side Shunt. The communication interface is IrDA.

File format: PDF Size:116 KB

This data sheet introduces the ST7580 power line networking system-on-chip and its features and functions, including the main board for AC power supply and the STM32 microcontroller for handling the ST7580 device and building a standalone power line node.

File format: PDF Size:132 KB

This is a production information of STM32L152D-EVAL evaluation board

File format: PDF Size:563 KB

The STEVAL-IFS017V1 demonstration board provides an evaluation platform for testing multiple temperature sensor and real-time clock (RTC) ICs from STMicroelectronics. The STEVAL-IFS017V1 acts as a motherboard based on the STM32 microcontroller, to which different daughter cards with temperature sensors and RTCs can be connected. The temperature sensors supported by this system are: the STLM20, STTS424E02, STTS75, STDS75, STLM75, STCN75, STTS751, and STTS2002. RTCs supported by this system are: the M41T82SM6, M41T83SQA6, M41T83SMY6. The STEVAL-IFS017V1 demonstration board can operate in USB powered mode with a graphical user interface (GUI). The graphical user interface is used to access the registers and demonstrate the features of temperature sensors and RTCs.

File format: PDF Size:341 KB

This file is a product manual for STEVAL-ISA102V1.

File format: PDF Size:225 KB

This is a single phase electricity meter with dual EEPROM M24LR64 and STPM10 and STM8L152. It features parameter display, tamper management, maximum demand (MD) calculation, EEPROM data logging and low power management.

File format: PDF Size:286 KB

This document provides detailed information about the product STEVAL-IFS017V2, including product features, description, schematic diagram, etc.

File format: PDF Size:81 KB

STEVAL-IFS017V3 is a temperature sensor daughter card based on the STTS751-1DP3F in UDFN package, USB powered, RoHS compliant

File format: PDF Size:78 KB

The STEVAL-ISA096V1 is a switched mode power supply (SMPS) demonstration board. This non-isolated SMPS is designed in a buck-boost topology and is capable of delivering up to 2 W of output over a wide input voltage range. This board also offers the user the possibility of adapting the circuit to specific needs, thanks to an available free PCB area.

File format: PDF Size:233 KB

This document is a data brief for the STEVAL-IPE015V1 single-phase energy metering demonstration board by STMicroelectronics. The demonstration board features class 0.5 accuracy, Vnom(RMS) of 140 to 300V, Inom/Imax(RMS) of 2/20A, and flin of 45 to 65Hz. It also includes tamper detection for power line systems, capacitive power supply, SPI interface connector, and is RoHS compliant.

File format: PDF Size:175 KB

File format: PDF Size:0 KB

The STEVAL-IPE017V1 is a single-phase class 0.5 accuracy demonstration board based on the STPM10 chip and a shunt resistor for energy metering. It is designed for power line systems with a nominal voltage of 140 to 300 VRMS, a nominal/current maximum current of 2/20 ARMS, a frequency range of 45 to 65 Hz, and an operating temperature range of -40 to +85 °C. This demonstration board features a capacitive power supply, SPI interface connector, and is RoHS compliant.

File format: PDF Size:164 KB

The STEVAL-IPE018V1 is a single-phase energy metering demonstration board released by ST company, based on the STPM10 chip, with a class 0.5 accuracy, an rated voltage of 140 to 300 V, an rated current of 2 to 20 A, a frequency of 45 to 65 Hz, capacitive power supply, and RoHS compliance.

File format: PDF Size:170 KB

File format: PDF Size:0 KB

Introduces the STEVAL-IFP020V1 PLC (for industrial automation) digital output solution using a 2.5 A single high-side smart power switch based on the L6370Q

File format: PDF Size:160 KB

This document describes a double output SMPS module for power line applications, using the ALTAIR04-900 primary controller. The module features universal input mains range, double output voltage, optoless constant voltage-constant current output regulation, etc.

File format: PDF Size:101 KB

The STEVAL-IFP021V1 demonstration board is based on the STEF05 and STEF12 electronic fuses (E-Fuses). It features input voltages of 5V and 12V, continuous current of 3.6A each, adjustable slew rate for output voltage, overvoltage clamp, undervoltage lockout, programmable short-circuit current limit, overload current limit, controlled output voltage ramp, thermal latch protection, fault condition flag, and enable pin.

File format: PDF Size:165 KB

This document describes a 3000W photovoltaic converter for grid-connected applications. The converter has a wide input and output voltage range, high efficiency, and significant reduction in production costs.

File format: PDF Size:524 KB

The STEVAL-IHM035V1 is a power board designed to drive a high voltage/low power 3-phase brushless motor. It utilizes the ST IPM STGIPN3H60 (SLLIMM™-nano) for compact size and efficient power dissipation. The board is compatible with synchronous or asynchronous brushless motors (PMSM and ACIM) and can be interfaced with any ST MCU control board to implement a complete motor drive.

File format: PDF Size:141 KB

STEVAL-TLL006V2 is a new high-power LED driver demo board for single flash with I²C interface based on STCF06 (with motherboard based on µPSD).

File format: PDF Size:248 KB