Industrial Manuals

This document introduces the features of STEVAL-MKI117V2 MEMS microphone demonstration board, including power supply, connection method, microphone type, data transmission method, etc.

File format: PDF Size:349 KB

The STEVAL-MKI107V2 is an adapter board designed to facilitate the evaluation of MEMS devices in the L3GD20 product family. The board can be plugged into a standard DIL 24 socket and provides the complete L3GD20 pinout with decoupling capacitors on the VDD power supply line.

File format: PDF Size:200 KB

EVAL6206Q is a dual full bridge with programmable overcurrent evaluation board from STMicroelectronics. Its features include voltage range from 8V to 52V, phase current up to 2.5Ar.m.s., adjustable overcurrent threshold, logic inputs compatible with 5V/3.3V, small application footprint with high thermal performance, suitable for use in combination with PractiSPIN™2 software.

File format: PDF Size:1783 KB

This is a stepper motor driver board that can be used to test the L6208Q functions. The board can be driven using the STEVAL-PCC009V2 communication board and the PractiSPIN 2 evaluation software.

File format: PDF Size:2049 KB

The STM8T143-EVAL evaluation board is a complete demonstration and development platform for the STM8T143 touch and proximity capacitive sensors. It includes a main board with an STM8T143AM62, a programming and data streaming board and 5 electrode boards with different ground planes.

File format: PDF Size:137 KB

This data brief describes the STEVAL-ISA068V1, a 4 A/1.5 MHz step-down synchronous switching regulator based on the ST1S32 in DFN 4x4 package. It features 4 A DC output current, 2.8 V to 5.5 V input voltage, output voltage adjustable from 0.8 V, 1.5 MHz switching frequency, internal soft-start and enable, integrated 60 mΩ and 45 mΩ power MOSFETs, all ceramic capacitor, Power Good (POR), cycle-by-cycle current limiting, current foldback short-circuit protection and RoHS compliance.

File format: PDF Size:338 KB

The EVAL6235Q is a 3-phase BLDC motor driver board that allows the user to test the L6235Q functions. The board can be driven using the STEVAL-PCC009V2 communication board and the PractiSPIN 2 evaluation software.

File format: PDF Size:1796 KB

STEVAL-ISA070V1 is a 3A/1.5MHz step-down synchronous switching regulator based on the ST1S31. It features a 4A peak output current, 2.8V to 5.5V input voltage range, adjustable 0.8V output voltage, and 1.5MHz switching frequency.

File format: PDF Size:295 KB

The STEVAL-MKI120V1 LPS331AP adapter board is a standard DIL24 socket adapter board with the following features: 1. Complete LPS331AP pinout in a standard DIL 24 socket; 2. Fully compatible with all other available adapter boards; 3. RoHS compliant. The board provides an effective solution for fast system prototyping and device evaluation directly within the user's own application.

File format: PDF Size:114 KB

The STEVAL-ISA097V1 demonstration board is a step-down switching power supply based on the L7985 in DFN10 package. It has a 2A DC output current, input voltage range from 4.5V to 38V, adjustable output voltage starting from 0.6V, programmable 250kHz switching frequency up to 1MHz, internal soft-start and enable, low dropout operation with 100% duty cycle, voltage feed-forward, zero load current operation, overcurrent and thermal protection.

File format: PDF Size:305 KB

This datasheet provides technical information about the STEVAL-IFP016V2 IO-Link communication master transceiver demonstration board, including features, description, schematic diagram, revision history, etc.

File format: PDF Size:408 KB

The STEVAL-ISA098V1 is a step-down switching power supply demonstration board based on the L7985A in HSOP8 package. It features a 2A DC output current, a 4.5V to 38V input voltage range, adjustable output voltage from 0.6V, and a programmable switching frequency up to 1MHz. Additionally, it includes internal soft-start and enable, low dropout operation, voltage feed-forward, zero load current operation, overcurrent and thermal protection, and is RoHS compliant.

File format: PDF Size:287 KB

This document introduces the features of the power module based on STEVAL-ISA099V1 demonstration board, which adopts L7986 chip, supports 3A output current, input voltage range from 4.5V to 38V, and output voltage can be adjusted from 0.6V to VIN.

File format: PDF Size:291 KB

STEVAL-ISA100V1 is a 3A step-down switching demonstration board based on the L7986A, featuring adjustable output voltage, 250kHz switching frequency, overcurrent and thermal protection, etc.

File format: PDF Size:297 KB

This data sheet introduces the STEVAL-MKI122V1 adapter board, which can be used to evaluate the LSM330DLC product family, for fast prototyping and device evaluation

File format: PDF Size:228 KB

This document is an introduction to STEVAL-MKI123V1 LSM330D adapter board, which can be used for fast system prototyping and device evaluation.

File format: PDF Size:236 KB

This document introduces the features and characteristics of the STEVAL-MKI124V1 module, including the module's pin definition, compatibility and other information.

File format: PDF Size:265 KB

This document is Sensaphone WSG30 user manual, which mainly introduces the characteristics and usage of WSG30

File format: PDF Size:1626 KB

This is the user manual for the WEB600 product from SENSAPHONE. It introduces the usage of the product and safety instructions.

File format: PDF Size:1262 KB

This data brief introduces the features and characteristics of the STEVAL-IFS017V4 temperature sensor daughter card based on the STTS751-0WB3F in SOT package, including multiple device temperature sensor, USB powered and RoHS compliant.

File format: PDF Size:82 KB