Industrial Manuals

The AN8001FHK is a 64-gradation LCD grading voltage generation IC with a high-precision reference voltage source (1.23V), a wide dynamic range of buffer amplifiers, and a large COM-amplifier drive current (±100 mA (max.)).

File format: PDF Size:75 KB

STPS61150CW is a high voltage power Schottky rectifier from ST. It has a rated reverse voltage of 150V and a rated forward current of 30A. This diode features high junction temperature capability, low leakage current, low thermal resistance, etc. It is suitable for high frequency switch mode power supply applications.

File format: PDF Size:54 KB

The AN8000MS is a ripple filter IC that rejects the ripple component superimposed on the regulator output. Use for the VCO bias of cellular phones improves C/N and S/N and makes high-quality telephone communication possible. Furthermore, by decreasing the difference between I/O voltages, drop in the power supply voltage of VCO is reduced.

File format: PDF Size:73 KB

This document describes the features and characteristics of the STPS3060CW high voltage dual Schottky rectifier, suitable for switchmode power supplies and other power converters. It has negligible switching losses, low forward voltage drop, low capacitance, and high reverse avalanche surge capability.

File format: PDF Size:48 KB

AN8000MS is a ripple filter IC used for the VCO bias of cellular phones, which improves C/N and S/N and makes high-quality telephone communication possible. Furthermore, by decreasing the difference between I/O voltages, drop in the power supply voltage of VCO is reduced.

File format: PDF Size:73 KB

The TURBOSWITCH “H” is an ultra high performance diode composed of two 300V dice in series. TURBOSWITCH “H” family drastically cuts losses in the associated MOSFET when run at high dIF/dt. Especially suited as boost diode in continuous mode power factor correctors and hard switching conditions. Designed for high dIF/dt operation. Hyperfast recovery current to compete with SiC devices. Allows downsizing of MOSFET and heatsinks. Internal ceramic insulated devices with equal thermal conditions for both 300V diodes. Insulation (2500VRMS) allows placement on same heatsink as MOSFET. Flexible heatsinking on common or separate heatsink. Static and dynamic equilibrium of internal diodes are warranted by design. Package Capacitance: C=7pF

File format: PDF Size:57 KB

STTH806DTI is a 600V dual in-line power diode from ST. It has very fast switching speed, faster than SiC devices, and can be used in PFC circuits.

File format: PDF Size:90 KB

The AN8000 series is a 3-pin low-dropout fixed positive output monolithic voltage regulator. Since thier power consumption can be minimized, they are suitable for bat- tery stabilizing power supply and reference voltage. Thir- teen types of output voltage are available ; 2V, 2.5V, 3V, 3.5V (TO-92 only) , 4V, 4.5V, 5V, 6V, 7V, 8V, 8.5V, 9V, and 10V.

File format: PDF Size:73 KB

The TURBOSWITCH “H” is an ultra high performance diode composed of two 300V dice in series. TURBOSWITCH “H” family drastically cuts losses in the associated MOSFET when run at high dIF/dt. It is especially suited as a boost diode in continuous mode power factor correctors and hard switching conditions. It is designed for high DI/DT operation and has hyperfast recovery current to compete with SIC devices, allowing downsizing of MOSFET and heatsinks. The internal ceramic insulated devices have equal thermal conditions for both 300V diodes. The insulation (2500VRMS) allows placement on the same heatsink as MOSFET and flexible heatsinking on common or separate heatsinks. The static and dynamic equilibrium of internal diodes are warranted by design. Package capacitance: C=16pF

File format: PDF Size:72 KB

STTH3006DPI is a 600V hyperfast recovery diode that is especially suited as a boost diode in continuous mode power factor correctors and hard switching conditions. The device is designed for high dIF/dt operation and features a hyperfast recovery current to compete with SiC devices. This allows downsizing of MOSFETs and heatsinks.

File format: PDF Size:68 KB

The STPS3150 is a 150V power Schottky rectifier from STMicroelectronics. It is suitable for switch mode power supplies and high frequency converters. It features low conduction losses, low forward voltage drop, and low thermal resistance.

File format: PDF Size:119 KB

STPS2150 is a power Schottky rectifier from ST. It features negligible switching losses, low forward voltage drop, low thermal resistance, and small package. It is suitable for switch mode power supplies, consumer electronic products and computer applications.

File format: PDF Size:134 KB

This document describes a power Schottky rectifier with negligible switching losses, low forward voltage drop for higher efficiency and extended battery life, low thermal resistance, surface mount miniature package, and specified avalanche capability. It is suitable for high frequency converters and switch mode power supplies on up to 24 V rails. It is intended for consumer and computer applications like TV, STB, PC, and DVD where low drop forward voltage is required to reduce power dissipation.

File format: PDF Size:115 KB

STPS60L40CW is a 5A low voltage power Schottky diode with low voltage drop, no inductance, etc., and is suitable for high frequency switched mode power supplies, DC/DC converters, etc.

File format: PDF Size:54 KB

This document introduces ST's STPS30L40CG/CT/CW low voltage low current Schottky rectifier. This device is suitable for switching power supplies and high frequency DC/DC converters. Packaged in TO-247, TO-220AB and D2PAK, these devices are intended for use in low voltage, high frequency inverters, free-wheeling and polarity protection applications.

File format: PDF Size:107 KB

The STPS10L40C is a low voltage dual center tap Schottky rectifier from ST. It features a low forward voltage drop and low dynamic losses, and is suitable for use in switched mode power supplies and high frequency DC to DC converters. The device is available in TO-220AB, TO-220FPAB and D2PAK packages, and can be used in low voltage, high frequency inverters, free-wheeling and polarity protection applications.

File format: PDF Size:140 KB

STPS0530Z is a single Schottky rectifier suited for switch mode power supplies and high frequency DC to DC converters. It features very small conduction losses, negligible switching losses, and extremely fast switching.

File format: PDF Size:102 KB

File format: PDF Size:0 KB

File format: PDF Size:0 KB

The STTH110 is an ultrafast high voltage rectifier using ST's ultrafast high voltage planar technology, which is specially suited for free-wheeling, clamping, snubbering, demagnetization in power supplies and other power switching applications.

File format: PDF Size:76 KB