Industrial Manuals

DENSITRON DD-12833YW-1A with EVK board

This application note introduces the features and characteristics of the DD-12833YW-1A OLED display module, including interface specifications.

File format: PDF Size:674 KB

LEAP ELECTRONIC LEAPER-3C HANDY FLASH WRITER

LEAPER-3C, introduced by LEAP ELECTRONIC CO., LTD., is a specially designed programmer for FLASH series. It integrates powerful hardware and software to perform high-quality programming. It is the best choice for programming FLASH series devices. The most attractive feature of LEAPER-3C is its adherence to the 4T products policy, which stands for Light, Thin, Short, and Tiny. In line with the concept of environmental protection, LEAPER-3C avoids unnecessary over-packaging, fulfilling its responsibility to the earth. The programmer is small, portable, light, and can be powered by batteries. It supports both stand-alone programming and PC connection modes. It is compatible with Windows 95/98/NT/2000/ME/XP operating systems. It has five function keys for operations such as blank check, verification, checksum, and programming. It can be connected to a PC via a USB port for data transmission and execution of various functions.

File format: PDF Size:922 KB

TEXAS INSTRUMENTS - ADS1274 ADS1278 Quad/Octal Simultaneous Sampling 24-Bit Analog-to-Digital Converters handbook

The ADS1274 and ADS1278 are 24-bit, delta-sigma analog-to-digital converters (ADCs) with data rates up to 128k samples per second (SPS), allowing simultaneous sampling of four or eight channels.

File format: PDF Size:1727 KB

NATIONAL SEMICONDUCTOR -DS91M040 125 MHz Quad M-LVDS Transceiver handbook

The DS91M040 is a quad M-LVDS transceiver designed for driving / receiving clock or data signals to / from up to four multipoint networks.

File format: PDF Size:401 KB

MAHR Digital Caliper 16 EX with marconnect

Digital Caliper 16 EX is a digital caliper with marconnect connection system, which transmits data directly and reliably via electronic standard interfaces OPTO-RS-232C and Digimatic to a PC or printer. Its features include measurement functions, high contrast LCD display, stainless steel slide and beam, measuring blades for inside measurement, depth measuring rod, and step measuring function.

File format: PDF Size:103 KB

TEXAS INSTRUMENTS -TL1454A TL1454AY DUAL-CHANNEL PULSE-WIDTH-MODULATION (PWM) CONTROL CIRCUIT handbook

The TL1454A/TL1454AY is a dual-channel pulse-width modulation (PWM) control circuit primarily intended for low-power dc/dc converters. Applications include LCD displays, backlight inverters, notebook computers, and other products requiring small, high-frequency, dc/dc converters. Each PWM channel has its own error amplifier, PWM comparator, dead-time control comparator, and MOSFET driver. The voltage reference, oscillator, undervoltage lockout, and short-circuit protection are common to both channels. Channel 1 is configured to drive n-channel MOSFETs in step-up or flyback converters, and channel 2 is configured to drive p-channel MOSFETs in step-down or inverting converters. The operating frequency is set with an external resistor and an external capacitor, and dead time is continuously adjustable from 0 to 100% duty cycle with a resistive divider network. Soft start can be implemented by adding a capacitor to the dead-time control (DTC) network. The error-amplifier common-mode input range includes ground, which allows the TL1454A to be used in ground-sensitive applications.

File format: PDF Size:585 KB

AVAGO TECHNOLOGIES HDSP-52xE Series HDSP-52xG Series HDSP-52xY Series 14.2 mm (0.56 inch) General Purpose Two Digit Seven Segment Displays Technical Data

HDSP-521x/523x series are Agilent 14.2mm(0.56inch) general purpose two digit seven segment displays, which are using standard size and pin-out. They are available as either common anode or common cathode, and a choice of high efficiency red(HER), green or yellow colors, and either right hand decimal or left hand decimal. These devices are suitable for indoor use, and are not recommended for industrial applications, such as operating temperatures requirements exceeding 85°C or below -35°C, or extreme temperature cycling.

File format: PDF Size:77 KB

AVAGO TECHNOLOGIES HDSP-C8x1/C8x3 0.8 Single Digit PCB Based LED Display Data Sheet

This is a 0.8” height single digit display. It utilizes GaAsP/GaP Red, Orange, Yellow, Green and AlGaAs/GaAs Red chips. This device is halogenated. The features of this product are: high reliability, excellent characters appearance, available in CA and CC, RoHS Compliant, gray top surface with white diffused segments.

File format: PDF Size:152 KB

OSRAM SYLVANIA - LRTB C9TP Multi CERAMOS Enhanced optical Power LED (ThinFilm ThinGaN) Lead (Pb) Free Product - RoHS Compliant

This document describes the features and characteristics of the LRTB C9TP Multi CERAMOS Enhanced optical Power LED (ThinFilm / ThinGaN) product, including its suitability for RGB displays, wavelength, emission angle, and optical efficiency.

File format: PDF Size:539 KB

ANALOG DEVICES - ADT7473 handbook

dBCool® Remote Thermal Monitor and Fan Controller ADT7473 controls and monitors up to 4 fans with high and low frequency fan drive signal. It has 1 on-chip and 2 remote temperature sensors with series resistance cancellation on the remote channel. It provides extended temperature measurement range up to 191°C, dynamic TMIN control mode to optimize system acoustics intelligently, automatic fan speed control mode to control system cooling based on measured temperature, enhanced acoustic mode to dramatically reduce user perception of changing fan speeds, thermal protection feature via THERM output, monitoring performance impact of Intel® Pentium®4 processor, thermal control circuit via THERM input, 3-wire and 4-wire fan speed measurement, limit comparison of all monitored values, and meets SMBus 2.0 electrical specifications (fully SMBus 1.1 compliant). It is fully ROHS compliant.

File format: PDF Size:1351 KB

MOLEX HAND CRIMP TOOL Specification Sheet Order No. 63819-1100

This is a specification sheet for a hand crimping tool, suitable for 0.093 inches and 0.125 inches of pins and sockets and commoning terminals.

File format: PDF Size:400 KB

OSRAM SYLVANIA - LS Q976 LO Q976 LY Q976 Hyper CHIPLED Hyper-Bright LED 2006-01-20 1 Lead (Pb) Free Product - RoHS Compliant

This document describes the features and characteristics of LS Q976, LO Q976, LY Q976 Hyper CHIPLED Hyper-Bright LED. The product features small size, multiple colors, wide wavelength range, and wide viewing angle, making it suitable for outdoor displays, flat panel backlighting, signal lights, and marking illumination.

File format: PDF Size:496 KB

TOSHIBA MATSUSHITA DISPLAY TECHNOLOGY VNR104C11S-INV PRODUCT INFORMATION

This document provides information on the mechanical and electrical specifications of a product. The product has dimensions of 110.0(W) x 22.0(H) x 10.0(Max.)(D) mm and weighs approximately 25g. It is applicable to TFT modules LTD104C11S, LTD121GA0S, LTD121C30S. The document includes absolute maximum ratings such as supply voltage and operating temperature, as well as electrical specifications such as input current, output voltage, and frequency.

File format: PDF Size:39 KB

MICROCHIP PIC16F716 Data Sheet

PIC16F716 is an 8-bit flash-based microcontroller with A/D converter and enhanced capture/compare/PWM

File format: PDF Size:2119 KB

CHAUVIN ARNOUX C.A 8220 POWER ANALYSER AND MOTOR DIAGNOSTIC TOOLS

C.A 8220 is an AC+DC 600 VRMS single-phase or balanced 3 phase power analyser equipped with a liquid crystal segment screen. It is designed for electrical engineering, especially testing of rotating machines, for technicians and engineers working in maintenance testing teams, and for civil service departments. The C.A 8220 measures the effective values, powers and disturbance of electrical supply networks. It provides an instant image of the main characteristics of a network and enables testing of rotating machines (temperature, start-up current and length, coiling impedance, rotation speed).

File format: PDF Size:259 KB

MAXIM MAX6971 handbook

The MAX6971 is a serial-interfaced LED driver that provides 16 open-drain, constant-current-sinking LED driver outputs rated at 36V. The MAX6971 operates from a 3V to 5.5V supply. The MAX6971 supply and the LEDs’ supply or supplies can power up in any order. The constant-current outputs are programmed together to up to 55mA using a single external resistor. The MAX6971 operates with a 25Mb, industry-standard, 4-wire serial interface. The MAX6971 uses the industry-standard, shift-register-plus-latch-type serial interface. The driver accepts data shifted into a 16-bit shift register using data input DIN and clock input CLK. Input data appears at the DOUT output 16 clock cycles later to allow cascading of multi- ple MAX6971s. The latch-enable input, LE, loads the 16 bits of shift register data into a 16-bit output latch to set which LEDs are on and which are off. The output- enable, OE, gates all 16 outputs on and off, and is fast enough to be used as a PWM input for LED intensity control. For applications requiring LED fault detection, refer to the MAX6983, which automatically detects open-circuit LEDs. For safety-related applications requiring a watchdog timer, refer to the MAX6983, which includes a fail-safe feature that blanks the display if the serial interface becomes inactive for more than 1s. The MAX6971 is one of a family of 12 shift-register-plus- latch-type LED drivers. The family includes 8-port and 16-port types, with 5.5V- or 36V-rated LED outputs.

File format: PDF Size:204 KB

PARAT - 2 Professional lighting equipment made in USA.

Professional lighting equipment made in USA. Von dem US- Hersteller UNDERWATER KINETICS für den professionellen Einsatz ent- wickelt und hergestellt, zählen die wasserdichten UK-Hochleistungs- Arbeits- und Tauchlampen heute bei Rettungs-, Bergungs- und Tauchein- sätzen sowie technischen Hilfskräften und Feuerwehren zur Ausrüstung und finden ihren Einsatz ebenso in Freizeit, Haushalt und Sport und sollten auch in Industrie und Hand- werk zur Grundaussta

File format: PDF Size:2973 KB

LINEAR TECHNOLOGY - LT6220/LT6221/LT6222 handbook

The LT ®6220/LT6221/LT6222 are single/dual/quad, low power, high speed rail-to-rail input and output operational amplifiers with excellent DC performance.

File format: PDF Size:282 KB

DENSITRON NUMBER DD-2864BY-2A with EVK board

This document introduces the application notes of DD-2864BY-2A OLED display module, including EVK board schematic, symbol definition, timing characteristics, connection method, etc.

File format: PDF Size:628 KB

Brands



Products