ROHS Manuals
RoHS Compliant Sharma Resistors handbook
This document describes the features and characteristics of the CR Thick Film Chip Resistor series, including long-term stability, suitability for general-purpose applications, and compact size. It also provides specifications of the resistor, such as resistance range, rated power, rated voltage, temperature coefficient, etc.
File format: PDF Size:254 KB
ROHS BPC-8590
File format: PDF Size:0 KB
RoHS Compliant handbook
This is a product manual that introduces the product features of CMB24 cable assembly, including size, materials, specifications, etc.
File format: PDF Size:337 KB
ROHS Type 361R 105 °C Miniature Industrial Grade Radial Leaded High-value High Ripple Low ESR ESL
Type 361R 105 °C is an industrial grade miniature radial leaded capacitor suitable for industrial applications, with a operating temperature range of -40 °C to +105 °C. It features excellent ripple capability and low ESR and ESL. Also available with three mounting leads.
File format: PDF Size:287 KB
ROHS TS39300/1/2/3/4 handbook
TS39300/1/2/3/4 are 3A ultra low dropout linear voltage regulators that provide low voltage, high current output with a minimum of external components. The TS3930x series offers extremely low dropout (typically 400mV at 3A) and low quiescent current (typically 36mA at 3A). TS39300/1/2/3/4 is ideal for PC add-in cards that need to convert from standard 3.3V to 2.5V or 2.5V to 1.8V. A guaranteed maximum dropout voltage of 500mV over all operating conditions allows the TS39300/1/2/3/4 to provide 2.5V from a supply as low as 3V, and 1.8V from a supply as low as 2.5V. The TS39300/1/2/3/4 also has fast transient response for heavy switching applications. The device requires only 47uF of output capacitor to maintain stability and achieve fast transient response. On the TS39300/1/2/3/4, the enable pin may be tied to input voltage if it is not required for enable control.
File format: PDF Size:503 KB
ROHS TS2576 handbook
TS2576 is a switch regulator produced by Antai Technology. It has a load capacity of 3A and can output 3.3V, 5V, and adjustable output voltages in three versions. The switching frequency is 52kHz and it has an external shutdown function. The static current is 70μA.
File format: PDF Size:396 KB
ROHS Compliant Type AVGA 40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors
This document presents the specifications and characteristics of AVGA series high temperature and high capacitance SMT aluminum electrolytic capacitors from CDE Cornell Dubilier. These capacitors are suitable for applications requiring high capacitance such as filtering, bypassing, and power supply decoupling. Features include high temperature operation, long life, wide capacitance range, and various voltage options.
File format: PDF Size:198 KB
Rohs compliant Type 361R 105 °C Miniature Industrial Grade Radial Leaded High-value High Ripple Low ESR ESL
The 361R 105 °C series capacitors are industrial grade capacitors that operate from –40 °C to +105 °C and offer excellent ripple capability and low ESR and ESL. They are available with three leads or with a single lead.
File format: PDF Size:287 KB
RoHS AC20 Axial Coated Inductors
This document describes the features and characteristics of the AC20 series axial coated inductors, including special lead wire structure, magnetic core structure, humidity resistance coating, etc. The inductance range is from 0.027µh to 1000µh with a tolerance of 10% over the entire range. The product has heat resistance and mechanical strength requirements. Packaging is in the form of 5000 pieces per reel.
File format: PDF Size:901 KB
Rohs compliant Type 381LQ 105 °C Compact High-Ripple Snap-in 23% Smaller for Same Capacitance
File format: PDF Size:0 KB
ROHS compliant Type 101C 55 °C to 105 °C Low-ESR Wide-Temperature Grade
The product is a low ESR capacitor Type 101C produced by CDM Cornell Dubilier. Its features are high and low temperature resistance, high ripple current resistance, low ESR and high capacity.
File format: PDF Size:350 KB
RoHS Compliant 3D7324 SERIES Manual
The 3D7324 Monolithic Quadruple Fixed Delay Line is an integrated circuit that uses all-silicon, low-power CMOS technology. It has features such as TTL/CMOS compatible inputs and outputs, low ground bounce noise, leading- and trailing-edge accuracy, and temperature and Vdd stability. The delay range is from 6ns to 6000ns with a tolerance of 2% or 1.0ns.
File format: PDF Size:258 KB
RoHS compliant AMS2027 handbook
The AMS2027 is a power distribution switch intended for applications where heavy capacitive loads and short circuits are likely to be encountered. It features a high-side MOSFET switch, short circuit protection, available active-high or active-low enable, logic overcurrent output error flag, etc.
File format: PDF Size:54 KB
RoHS compliant AMS2026 handbook
The AMS2026 is a dual power distribution switch intended for applications where heavy capacitive loads and short-circuits are likely to be encountered. The high-side switch is a 110mΩ N-channel MOSFET. The switch is controlled by a logic enable input compatible with 3V and 5V logic and is available in active-high or active-low enable. The internal charge pump, designed to control the power switch rise and fall time to minimize current surges during switching, also provides the gate drive. Requiring no external components the charge pump allows operation from supplies as low as 3.3V. When an overload or a short circuit is encountered the AMS2026 limits the output current to a safe level by switching into a constant-current mode and the overcurrent logic output error flag is set to a low. Continuous heavy overload will cause the power to shut off and the switch to overheat, turning off the switch.
File format: PDF Size:56 KB
RoHS compliant AMS303 handbook
AMS303 is a low-power comparator from Advanced Monolithic Systems, Inc. It features open collector output, wide input common-mode voltage range, excellent speed-power ratio, typical propagation delay of 400ns and low supply current of 7µA. AMS303 is available in space-saving 5-pin SOT23 package.
File format: PDF Size:148 KB
RoHS compliant AMS4122 handbook
File format: PDF Size:0 KB
RoHS compliant AMS4123 handbook
AMS4123 Monolithic 2A BUCK CONVERTER + 1A LDO IN SO-8 is a switching regulator from Advanced Monolithic Systems, Inc. with 2A output power, 1A LDO output power, 300KHz switching frequency, internal soft start, zero current shutdown, 500mV maximum dropout.
File format: PDF Size:348 KB
RoHS compliant AMS4154 handbook
The AMS4154 is a 2A step-down converter for high voltage applications. Current mode operation provides easier compensation and fast transient response. Internal cycle-by-cycle current limiting and thermal shutdown provides the necessary protection in faults situation. A 5V reference voltage is available that can supply up to 2mA current. Available in 8-pin SOIC EDP package.
File format: PDF Size:364 KB
RoHS compliant AMS4155 handbook
The Advanced AMS4155 is a monolithic step down switch mode converter with a built-in internal power switch transistor. It achieves 2A continuous output current over a wide input supply range with excellent load and line regulation.
File format: PDF Size:395 KB
RoHS compliant AMS4106 handbook
The AMS4106 is a 5A synchronous PWM buck converter. It integrated high side MOSFET driver, supports external low side MOSFET, and is suitable for LCD TVs and monitors, computer peripherals, portable (notebook) computers, industrial power supply, high performance electronics, consumer electronics, audio power amplifiers, etc.
File format: PDF Size:438 KB